John Kuthe wrote:

> On Tuesday, December 1, 2020 at 6:39:06 PM UTC-6, Alex wrote:
> > John Kuthe wrote:
> > > On Tuesday, December 1, 2020 at 12:55:56 AM UTC-6, Sqwertz wrote:
> > >> On Mon, 30 Nov 2020 13:40:14 -0800 (PST), John Kuthe wrote:
> > >>
> > >>> https://i.postimg.cc/gkvTWpKQ/Kitche...helf-rails.jpg
> > >> Wasted space. What do you do with the front half of the closet?
> > >>
> > >> -sw
> > > All the stuff I don't do with the back of the Kitchen Closet!
> > > DUH!
> > >
> > >
> > > John Kuthe....
> >
> > You realized you didn't think this one out well - again, eh?
>
> I thought it out very well, and figured I had to get everything out
> of the bottom of the Kitchen Closet (done) and mount some shelf
> rails, which I've done. See pic.
>
> And today, I went Home Depot and bought a 4x4ft piece of almost 1/2"
> plywood and will cut 18"x30.5" shelves from and use my remaining 2x2s
> to mount a stiffener under them, then lay them on the rails, and
> voila! New shelves at 20" and 40", 18"x30.5" to put the stuff on!
>
> John Kuthe...

I had no dimensions before of the total unit. The camera can be tricky
in how it scales things but if the total depth (to back wall from the
open front) in 36-38inches and the wide (side to side) is 30.5, then
about right and leave room for brooms and stuff if you need that.

The problem is the visual appears to be more like 50-60 inches. That
might be camera related though.

If it is a lot deeper, you can add more rail later and extend out along
it 12 more inches with little trouble later.

Lots of ideas though if as it seems, it's 30.5 side to side in there.
It almost looks at the base like people stepped in there to get at
things?