On Wednesday, December 2, 2020 at 11:48:06 AM UTC-6, Cindy Hamilton wrote:
> On Wednesday, December 2, 2020 at 10:54:41 AM UTC-5, Sheldon wrote:
> > On Tue, 1 Dec 2020 Sqwertz wrote:
> > >On Tue, 1 Dec 2020 John Kuthe wrote:
> > >
> > >> And today, I went Home Depot and bought a 4x4ft piece of almost
> > >> 1/2" plywood and will cut 18"x30.5" shelves from and use my
> > >> remaining 2x2s to mount a stiffener under them, then lay them on
> > >> the rails, and voila! New shelves at 20" and 40", 18"x30.5" to
> > >> put the stuff on!
> > >
> > >$50 says they're wobbly.
> > >
> > >-sw
> > What is 'almost' 1/2" plywood, do you mean some specialty thickness
> > like 7/16"?
> Half-inch plywood is 15/32".

When we moved into this house, I discovered some 2x4s that were so old
that they were actually 2"x4". They're probably at least as old as Sheldon,
but far better preserved.
>
> Cindy Hamilton

--Bryan