Bryan
One of these days I'm going to have to invest in a mechanical labeller.
But in the mean time I'm still using the thrown together labeller I
made on the day of my first bottling.
I took a 1 foot piece of 1 x 12 and nailed on a 6 inch 1 x 2 across
the bottom. Then I took 2 others and mounted them perpendicular to it
about 1 and 1/2 inch apart. These two boards form a U and are mounted
to just cradle the bottle.
After that I put a piece of 2 x 2 under the top of it to tilt it a
little and there it was/is. Several thousand bottles later and it's
still going strong. Just get one bottle labled like you want it and
then make marks on the boards on both sides of it and then just line
the next labels up on the lines.
Bill

Bryan Webb wrote:
> I saw a gadget that holds 5 bottles (750ml) to keep them from rolling while
> putting the labels on.
> It is made of yellow plastic with a "wood grain" texture. The intra-bottle
> cross beams are bevelled.
>
> I have searched various equipment supplier websites to no avail,
>
> Does anyone know where I can get one? What do others use for labelling?
>
> Thanks In Advance
> Bryan