Siemens Glass/Ceramic Electric Hob/Top - Fitting Question
 

Hi,

I wonder if anyone can assist with the following.

I have purchased an ex display Siements ET7287OEU touch control
electric hob/top with a glass/ceramic top. It came without the fitting
instructions or any fitting attachments.

There are two stepped levels under the top surface, the lower of which
has 4 plastic pegs which look as though they are load bearing. If I
simply drop it into the worktop hole there is only about 8mm of
aluminum trim which is load bearing.

Would anyone have one of these or another similar siemens model that
they could let me know how exactly it fits in the worktop.

Regards
Dave Gibson

Siemens Glass/Ceramic Electric Hob/Top - Fitting Question
 

David Gibson > wrote in
:

> Hi,
>
> I wonder if anyone can assist with the following.
>
> I have purchased an ex display Siements ET7287OEU touch control
> electric hob/top with a glass/ceramic top. It came without the fitting
> instructions or any fitting attachments.
>
> There are two stepped levels under the top surface, the lower of which
> has 4 plastic pegs which look as though they are load bearing. If I
> simply drop it into the worktop hole there is only about 8mm of
> aluminum trim which is load bearing.
>
> Would anyone have one of these or another similar siemens model that
> they could let me know how exactly it fits in the worktop.
>
> Regards
> Dave Gibson
>

I suppose that's what one might expect when buying a sample/display
model. Best to write or all Siemens for proper installation
instructions. Hope you got a really good deal on this!

Wayne

Siemens Glass/Ceramic Electric Hob/Top - Fitting Question
 

Yes Wayne,

I got a really good deal & its in immaculate condition. The cheapest I
saw it for on one of the price comparison web sights was £495 plus £20
delivery. I paid £235 all done with warranty.

Thank you for your input and concern.

Dave Gibson


On Sun, 05 Oct 2003 11:53:16 GMT, Wayne Boatwright
> wrote:

>David Gibson > wrote in
:
>
>> Hi,
>>
>> I wonder if anyone can assist with the following.
>>
>> I have purchased an ex display Siements ET7287OEU touch control
>> electric hob/top with a glass/ceramic top. It came without the fitting
>> instructions or any fitting attachments.
>>
>> There are two stepped levels under the top surface, the lower of which
>> has 4 plastic pegs which look as though they are load bearing. If I
>> simply drop it into the worktop hole there is only about 8mm of
>> aluminum trim which is load bearing.
>>
>> Would anyone have one of these or another similar siemens model that
>> they could let me know how exactly it fits in the worktop.
>>
>> Regards
>> Dave Gibson
>>
>
>I suppose that's what one might expect when buying a sample/display
>model. Best to write or all Siemens for proper installation
>instructions. Hope you got a really good deal on this!
>
>Wayne

Siemens Glass/Ceramic Electric Hob/Top - Fitting Question
 

David Gibson > wrote in
:

> Yes Wayne,
>
> I got a really good deal & its in immaculate condition. The cheapest I
> saw it for on one of the price comparison web sights was £495 plus £20
> delivery. I paid £235 all done with warranty.
>
> Thank you for your input and concern.
>
> Dave Gibson
>
>
> On Sun, 05 Oct 2003 11:53:16 GMT, Wayne Boatwright
> > wrote:
>
>>David Gibson > wrote in
m:
>>
>>> Hi,
>>>
>>> I wonder if anyone can assist with the following.
>>>
>>> I have purchased an ex display Siements ET7287OEU touch control
>>> electric hob/top with a glass/ceramic top. It came without the
>>> fitting instructions or any fitting attachments.
>>>
>>> There are two stepped levels under the top surface, the lower of
>>> which has 4 plastic pegs which look as though they are load bearing.
>>> If I simply drop it into the worktop hole there is only about 8mm of
>>> aluminum trim which is load bearing.
>>>
>>> Would anyone have one of these or another similar siemens model that
>>> they could let me know how exactly it fits in the worktop.
>>>
>>> Regards
>>> Dave Gibson
>>>
>>
>>I suppose that's what one might expect when buying a sample/display
>>model. Best to write or all Siemens for proper installation
>>instructions. Hope you got a really good deal on this!
>>
>>Wayne
>
>

Dave, that's a terrific price! I'm sure that Siemens would happily
supply you with the installation instructions and, perhaps, even a
template. ASAIK, Siemens is very supportive of all their products.
They are high quality merchandise.

Happy cooking on your new acquisition!

Wayne

Siemens Glass/Ceramic Electric Hob/Top - Fitting Question
 

Wayne,

I can confirm that Siemens are sending me the fittings kit,
installation instructions and user manual free of charge and have set
up the two years parts and labour warranty also.

High class support I would say.

Dave Gibson

On Mon, 06 Oct 2003 03:42:48 GMT, Wayne Boatwright
> wrote:

>David Gibson > wrote in
:
>
>> Yes Wayne,
>>
>> I got a really good deal & its in immaculate condition. The cheapest I
>> saw it for on one of the price comparison web sights was £495 plus £20
>> delivery. I paid £235 all done with warranty.
>>
>> Thank you for your input and concern.
>>
>> Dave Gibson
>>
>>
>> On Sun, 05 Oct 2003 11:53:16 GMT, Wayne Boatwright
>> > wrote:
>>
>>>David Gibson > wrote in
:
>>>
>>>> Hi,
>>>>
>>>> I wonder if anyone can assist with the following.
>>>>
>>>> I have purchased an ex display Siements ET7287OEU touch control
>>>> electric hob/top with a glass/ceramic top. It came without the
>>>> fitting instructions or any fitting attachments.
>>>>
>>>> There are two stepped levels under the top surface, the lower of
>>>> which has 4 plastic pegs which look as though they are load bearing.
>>>> If I simply drop it into the worktop hole there is only about 8mm of
>>>> aluminum trim which is load bearing.
>>>>
>>>> Would anyone have one of these or another similar siemens model that
>>>> they could let me know how exactly it fits in the worktop.
>>>>
>>>> Regards
>>>> Dave Gibson
>>>>
>>>
>>>I suppose that's what one might expect when buying a sample/display
>>>model. Best to write or all Siemens for proper installation
>>>instructions. Hope you got a really good deal on this!
>>>
>>>Wayne
>>
>>
>
>Dave, that's a terrific price! I'm sure that Siemens would happily
>supply you with the installation instructions and, perhaps, even a
>template. ASAIK, Siemens is very supportive of all their products.
>They are high quality merchandise.
>
>Happy cooking on your new acquisition!
>
>Wayne

Siemens Glass/Ceramic Electric Hob/Top - Fitting Question
 

That's great, Dave! I would have expected nothing less from Siemens.

David Gibson > wrote in
:

> Wayne,
>
> I can confirm that Siemens are sending me the fittings kit,
> installation instructions and user manual free of charge and have set
> up the two years parts and labour warranty also.
>
> High class support I would say.
>
> Dave Gibson
>
> On Mon, 06 Oct 2003 03:42:48 GMT, Wayne Boatwright
> > wrote:
>
>>David Gibson > wrote in
m:
>>
>>> Yes Wayne,
>>>
>>> I got a really good deal & its in immaculate condition. The cheapest
>>> I saw it for on one of the price comparison web sights was £495 plus
>>> £20 delivery. I paid £235 all done with warranty.
>>>
>>> Thank you for your input and concern.
>>>
>>> Dave Gibson
>>>
>>>
>>> On Sun, 05 Oct 2003 11:53:16 GMT, Wayne Boatwright
>>> > wrote:
>>>
>>>>David Gibson > wrote in
m:
>>>>
>>>>> Hi,
>>>>>
>>>>> I wonder if anyone can assist with the following.
>>>>>
>>>>> I have purchased an ex display Siements ET7287OEU touch control
>>>>> electric hob/top with a glass/ceramic top. It came without the
>>>>> fitting instructions or any fitting attachments.
>>>>>
>>>>> There are two stepped levels under the top surface, the lower of
>>>>> which has 4 plastic pegs which look as though they are load
>>>>> bearing. If I simply drop it into the worktop hole there is only
>>>>> about 8mm of aluminum trim which is load bearing.
>>>>>
>>>>> Would anyone have one of these or another similar siemens model
>>>>> that they could let me know how exactly it fits in the worktop.
>>>>>
>>>>> Regards
>>>>> Dave Gibson
>>>>>
>>>>
>>>>I suppose that's what one might expect when buying a sample/display
>>>>model. Best to write or all Siemens for proper installation
>>>>instructions. Hope you got a really good deal on this!
>>>>
>>>>Wayne
>>>
>>>
>>
>>Dave, that's a terrific price! I'm sure that Siemens would happily
>>supply you with the installation instructions and, perhaps, even a
>>template. ASAIK, Siemens is very supportive of all their products.
>>They are high quality merchandise.
>>
>>Happy cooking on your new acquisition!
>>
>>Wayne
>
>