[Travis McGee[_2_]]

Years ago I was given really nice plastic cutting board. It was big, yet
fit on a normal counter (just barely). It also had a real moat and well,
unlike the fake moats that you see on lesser boards. I had to leave it
behind in the divorce, and I have been unable to find anything like it
since in plastic. I have a great wooden board that does the job, but it
weighs a ton and takes a certain amount of effort to keep in good shape.

Any sources would be appreciated.

[Julie Bove[_2_]]

"Sqwertz" > wrote in message
...
> On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>
>> Years ago I was given really nice plastic cutting board. It was big, yet
>> fit on a normal counter (just barely). It also had a real moat and well,
>> unlike the fake moats that you see on lesser boards. I had to leave it
>> behind in the divorce, and I have been unable to find anything like it
>> since in plastic. I have a great wooden board that does the job, but it
>> weighs a ton and takes a certain amount of effort to keep in good shape.
>>
>> Any sources would be appreciated.
>
> Very common at restaurant supply stores.
>
> http://www.acemart.com/prod4577.html
> (for example)
>
> Drip edges may be a little harder to find. Can't say I've seen those
> in plastic. not a feature I find very useful anyway.
>
I used to have one with a moat but it was many years ago. I never used it
much so got rid of it.

[Travis McGee[_2_]]

On 5/26/2014 2:13 AM, Julie Bove wrote:
>
> "Sqwertz" > wrote in message
> ...
>> On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>>
>>> Years ago I was given really nice plastic cutting board. It was big, yet
>>> fit on a normal counter (just barely). It also had a real moat and well,
>>> unlike the fake moats that you see on lesser boards. I had to leave it
>>> behind in the divorce, and I have been unable to find anything like it
>>> since in plastic. I have a great wooden board that does the job, but it
>>> weighs a ton and takes a certain amount of effort to keep in good shape.
>>>
>>> Any sources would be appreciated.
>>
>> Very common at restaurant supply stores.
>>
>> http://www.acemart.com/prod4577.html
>> (for example)
>>
>> Drip edges may be a little harder to find. Can't say I've seen those
>> in plastic. not a feature I find very useful anyway.
>>
> I used to have one with a moat but it was many years ago. I never used
> it much so got rid of it.

I used this one all the time, so much so that it started to warp because
I did not realize that I should have equalized the use to both sides.
Regardless, the wife kept it, so I had to move on.

I like my roasts rare, so cutting into them usually releases a lot of
juice. Without a real moat this generally leads to juice all over the
counter, and sometimes the floor. Plus, I lose this juice, which can be
used in gravy and other sauces.

I can deal with this by just putting paper towels in the general
direction that the juice wants to flow, but I'd like to have better
control over the situation.

[Pico Rico[_2_]]

"Travis McGee" > wrote in message
...
> On 5/26/2014 2:13 AM, Julie Bove wrote:
>>
>> "Sqwertz" > wrote in message
>> ...
>>> On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>>>
>>>> Years ago I was given really nice plastic cutting board. It was big,
>>>> yet
>>>> fit on a normal counter (just barely). It also had a real moat and
>>>> well,
>>>> unlike the fake moats that you see on lesser boards. I had to leave it
>>>> behind in the divorce, and I have been unable to find anything like it
>>>> since in plastic. I have a great wooden board that does the job, but it
>>>> weighs a ton and takes a certain amount of effort to keep in good
>>>> shape.
>>>>
>>>> Any sources would be appreciated.
>>>
>>> Very common at restaurant supply stores.
>>>
>>> http://www.acemart.com/prod4577.html
>>> (for example)
>>>
>>> Drip edges may be a little harder to find. Can't say I've seen those
>>> in plastic. not a feature I find very useful anyway.
>>>
>> I used to have one with a moat but it was many years ago. I never used
>> it much so got rid of it.
>
> I used this one all the time, so much so that it started to warp because I
> did not realize that I should have equalized the use to both sides.
> Regardless, the wife kept it, so I had to move on.
>
> I like my roasts rare, so cutting into them usually releases a lot of
> juice. Without a real moat this generally leads to juice all over the
> counter, and sometimes the floor. Plus, I lose this juice, which can be
> used in gravy and other sauces.
>
> I can deal with this by just putting paper towels in the general direction
> that the juice wants to flow, but I'd like to have better control over the
> situation.

you might put the cutting board inside a sheet tray to catch the juice.

[sf[_9_]]

On Mon, 26 May 2014 01:51:02 -0400, Travis McGee
> wrote:

> Years ago I was given really nice plastic cutting board. It was big, yet
> fit on a normal counter (just barely). It also had a real moat and well,
> unlike the fake moats that you see on lesser boards. I had to leave it
> behind in the divorce, and I have been unable to find anything like it
> since in plastic. I have a great wooden board that does the job, but it
> weighs a ton and takes a certain amount of effort to keep in good shape.
>
> Any sources would be appreciated.

I've never seen a poly board with a moat, not saying they don't exist
- just that they aren't popular. I suspect the reason why is they are
soft and get cut up so easily. I have a couple of big poly boards,
but I put a silicon mat on top when I'm cutting everything except
cooked meat. I use my bamboo boards (all have moats) to carve meat.


--

Good Food.
Good Friends.
Good Memories.

[Janet Wilder[_4_]]

On 5/26/2014 12:16 PM, sf wrote:
> On Mon, 26 May 2014 01:51:02 -0400, Travis McGee
> > wrote:
>
>> Years ago I was given really nice plastic cutting board. It was big, yet
>> fit on a normal counter (just barely). It also had a real moat and well,
>> unlike the fake moats that you see on lesser boards. I had to leave it
>> behind in the divorce, and I have been unable to find anything like it
>> since in plastic. I have a great wooden board that does the job, but it
>> weighs a ton and takes a certain amount of effort to keep in good shape.
>>
>> Any sources would be appreciated.
>
> I've never seen a poly board with a moat, not saying they don't exist
> - just that they aren't popular. I suspect the reason why is they are
> soft and get cut up so easily. I have a couple of big poly boards,
> but I put a silicon mat on top when I'm cutting everything except
> cooked meat. I use my bamboo boards (all have moats) to carve meat.
>
>
I have one. Use it for veggies. I think I got it at the supermarket.

--
Janet Wilder
Way-the-heck-south Texas
Spelling doesn't count. Cooking does.

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

[Julie Bove[_2_]]

"sf" > wrote in message
...
> On Mon, 26 May 2014 01:51:02 -0400, Travis McGee
> > wrote:
>
>> Years ago I was given really nice plastic cutting board. It was big, yet
>> fit on a normal counter (just barely). It also had a real moat and well,
>> unlike the fake moats that you see on lesser boards. I had to leave it
>> behind in the divorce, and I have been unable to find anything like it
>> since in plastic. I have a great wooden board that does the job, but it
>> weighs a ton and takes a certain amount of effort to keep in good shape.
>>
>> Any sources would be appreciated.
>
> I've never seen a poly board with a moat, not saying they don't exist
> - just that they aren't popular. I suspect the reason why is they are
> soft and get cut up so easily. I have a couple of big poly boards,
> but I put a silicon mat on top when I'm cutting everything except
> cooked meat. I use my bamboo boards (all have moats) to carve meat.
>
I got to thinking about this after I posted and now I remember why I got rid
of mine. It was designed to fit over the sink. Just not *my* sink. It was
never the correct size for any of the sinks that I ever had. And although
it had a moat, it also had this large depression at the one end which meant
that the board itself was not flat on the bottom. I guess the depression
was so that you could push the scraps into it and whatever juice would drain
into the sink. So... Totally wouldn't work for his purposes.

[Steve Freides[_2_]]

Travis McGee wrote:
> Years ago I was given really nice plastic cutting board. It was big,
> yet fit on a normal counter (just barely). It also had a real moat
> and well, unlike the fake moats that you see on lesser boards. I had
> to leave it behind in the divorce, and I have been unable to find
> anything like it since in plastic. I have a great wooden board that
> does the job, but it weighs a ton and takes a certain amount of
> effort to keep in good shape.
> Any sources would be appreciated.

FWIW, our house came with what I guess you'd call butcher block as a
counter surface, just on top of the dishwasher. We have used it merrily
for 20+ years, take terrible care of it, which is to say we use it, wipe
it off from time to time, and that's it, and it's still great.

-S-

[Chemo[_2_]]

On Sunday, May 25, 2014 11:13:25 PM UTC-7, Julie Bove wrote:
> "Sqwertz" > wrote in message
>
> ...
>
> > On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>
> >
>
> >> Years ago I was given really nice plastic cutting board. It was big, yet
>
> >> fit on a normal counter (just barely). It also had a real moat and well,
>
> >> unlike the fake moats that you see on lesser boards. I had to leave it
>
> >> behind in the divorce, and I have been unable to find anything like it
>
> >> since in plastic. I have a great wooden board that does the job, but it
>
> >> weighs a ton and takes a certain amount of effort to keep in good shape.
>
> >>
>
> >> Any sources would be appreciated.
>
> >
>
> > Very common at restaurant supply stores.
>
> >
>
> > http://www.acemart.com/prod4577.html
>
> > (for example)
>
> >
>
> > Drip edges may be a little harder to find. Can't say I've seen those
>
> > in plastic. not a feature I find very useful anyway.
>
> >
>
> I used to have one with a moat but it was many years ago. I never used it
>
> much so got rid of it.

and your point????

[Julie Bove[_2_]]

"Chemo" > wrote in message
...
> On Sunday, May 25, 2014 11:13:25 PM UTC-7, Julie Bove wrote:
>> "Sqwertz" > wrote in message
>>
>> ...
>>
>> > On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>>
>> >
>>
>> >> Years ago I was given really nice plastic cutting board. It was big,
>> >> yet
>>
>> >> fit on a normal counter (just barely). It also had a real moat and
>> >> well,
>>
>> >> unlike the fake moats that you see on lesser boards. I had to leave it
>>
>> >> behind in the divorce, and I have been unable to find anything like it
>>
>> >> since in plastic. I have a great wooden board that does the job, but
>> >> it
>>
>> >> weighs a ton and takes a certain amount of effort to keep in good
>> >> shape.
>>
>> >>
>>
>> >> Any sources would be appreciated.
>>
>> >
>>
>> > Very common at restaurant supply stores.
>>
>> >
>>
>> > http://www.acemart.com/prod4577.html
>>
>> > (for example)
>>
>> >
>>
>> > Drip edges may be a little harder to find. Can't say I've seen those
>>
>> > in plastic. not a feature I find very useful anyway.
>>
>> >
>>
>> I used to have one with a moat but it was many years ago. I never used
>> it
>>
>> much so got rid of it.
>
> and your point????

That I too had one.

[sf[_9_]]

On Tue, 27 May 2014 16:26:29 -0700, "Julie Bove"
> wrote:

>
> "Chemo" > wrote in message
> ...
> > On Sunday, May 25, 2014 11:13:25 PM UTC-7, Julie Bove wrote:
> >> "Sqwertz" > wrote in message
> >>
> >> ...
> >>
> >> > On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
> >>
> >> >
> >>
> >> >> Years ago I was given really nice plastic cutting board. It was big,
> >> >> yet
> >>
> >> >> fit on a normal counter (just barely). It also had a real moat and
> >> >> well,
> >>
> >> >> unlike the fake moats that you see on lesser boards. I had to leave it
> >>
> >> >> behind in the divorce, and I have been unable to find anything like it
> >>
> >> >> since in plastic. I have a great wooden board that does the job, but
> >> >> it
> >>
> >> >> weighs a ton and takes a certain amount of effort to keep in good
> >> >> shape.
> >>
> >> >>
> >>
> >> >> Any sources would be appreciated.
> >>
> >> >
> >>
> >> > Very common at restaurant supply stores.
> >>
> >> >
> >>
> >> > http://www.acemart.com/prod4577.html
> >>
> >> > (for example)
> >>
> >> >
> >>
> >> > Drip edges may be a little harder to find. Can't say I've seen those
> >>
> >> > in plastic. not a feature I find very useful anyway.
> >>
> >> >
> >>
> >> I used to have one with a moat but it was many years ago. I never used
> >> it
> >>
> >> much so got rid of it.
> >
> > and your point????
>
> That I too had one.

If I ever saw one with a moat, it was a very long time ago. The image
sw provided above is not the type in question and everyone knows those
plain ones can be easily found without resorting to a restaurant
supply store.

If Travis can't find what he wants anywhere else, a good place to
inquire would be Tap Plastics because they can fabricate to order.



--

Good Food.
Good Friends.
Good Memories.

[Travis McGee[_2_]]

On 5/28/2014 12:47 AM, sf wrote:
> On Tue, 27 May 2014 16:26:29 -0700, "Julie Bove"
> > wrote:
>
>>
>> "Chemo" > wrote in message
>> ...
>>> On Sunday, May 25, 2014 11:13:25 PM UTC-7, Julie Bove wrote:
>>>> "Sqwertz" > wrote in message
>>>>
>>>> ...
>>>>
>>>>> On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>>>>
>>>>>
>>>>
>>>>>> Years ago I was given really nice plastic cutting board. It was big,
>>>>>> yet
>>>>
>>>>>> fit on a normal counter (just barely). It also had a real moat and
>>>>>> well,
>>>>
>>>>>> unlike the fake moats that you see on lesser boards. I had to leave it
>>>>
>>>>>> behind in the divorce, and I have been unable to find anything like it
>>>>
>>>>>> since in plastic. I have a great wooden board that does the job, but
>>>>>> it
>>>>
>>>>>> weighs a ton and takes a certain amount of effort to keep in good
>>>>>> shape.
>>>>
>>>>>>
>>>>
>>>>>> Any sources would be appreciated.
>>>>
>>>>>
>>>>
>>>>> Very common at restaurant supply stores.
>>>>
>>>>>
>>>>
>>>>> http://www.acemart.com/prod4577.html
>>>>
>>>>> (for example)
>>>>
>>>>>
>>>>
>>>>> Drip edges may be a little harder to find. Can't say I've seen those
>>>>
>>>>> in plastic. not a feature I find very useful anyway.
>>>>
>>>>>
>>>>
>>>> I used to have one with a moat but it was many years ago. I never used
>>>> it
>>>>
>>>> much so got rid of it.
>>>
>>> and your point????
>>
>> That I too had one.
>
> If I ever saw one with a moat, it was a very long time ago. The image
> sw provided above is not the type in question and everyone knows those
> plain ones can be easily found without resorting to a restauran
> supply store.
>
> If Travis can't find what he wants anywhere else, a good place to
> inquire would be Tap Plastics because they can fabricate to order.
>
>
>
Thanks. That's what I may have to do, if it's not too pricey. Of course,
I *really* don't have to get this, but I have a bug in my ear about it.
It may be enough to just find a source.

The one that I had was given to me by the ex, purchased from a very tony
gourmet kitchen store in Danville, CA, back in the early 90s or so. I
don't have any contact with her any more, and I don't remember the name
of the store, or the name of the board manufacturer. Oh well, you can't
always get what you want.

[Robert[_13_]]

"Travis McGee" wrote in message ...

>Thanks. That's what I may have to do, if it's not too pricey.

Is $19.95 for a set of 3 too pricey?

http://www.chefscatalog.com/product/...-set-3-pc.aspx



Robert

[Julie Bove[_2_]]

"sf" > wrote in message
news
> On Tue, 27 May 2014 16:26:29 -0700, "Julie Bove"
> > wrote:
>
>>
>> "Chemo" > wrote in message
>> ...
>> > On Sunday, May 25, 2014 11:13:25 PM UTC-7, Julie Bove wrote:
>> >> "Sqwertz" > wrote in message
>> >>
>> >> ...
>> >>
>> >> > On Mon, 26 May 2014 01:51:02 -0400, Travis McGee wrote:
>> >>
>> >> >
>> >>
>> >> >> Years ago I was given really nice plastic cutting board. It was
>> >> >> big,
>> >> >> yet
>> >>
>> >> >> fit on a normal counter (just barely). It also had a real moat and
>> >> >> well,
>> >>
>> >> >> unlike the fake moats that you see on lesser boards. I had to leave
>> >> >> it
>> >>
>> >> >> behind in the divorce, and I have been unable to find anything like
>> >> >> it
>> >>
>> >> >> since in plastic. I have a great wooden board that does the job,
>> >> >> but
>> >> >> it
>> >>
>> >> >> weighs a ton and takes a certain amount of effort to keep in good
>> >> >> shape.
>> >>
>> >> >>
>> >>
>> >> >> Any sources would be appreciated.
>> >>
>> >> >
>> >>
>> >> > Very common at restaurant supply stores.
>> >>
>> >> >
>> >>
>> >> > http://www.acemart.com/prod4577.html
>> >>
>> >> > (for example)
>> >>
>> >> >
>> >>
>> >> > Drip edges may be a little harder to find. Can't say I've seen
>> >> > those
>> >>
>> >> > in plastic. not a feature I find very useful anyway.
>> >>
>> >> >
>> >>
>> >> I used to have one with a moat but it was many years ago. I never
>> >> used
>> >> it
>> >>
>> >> much so got rid of it.
>> >
>> > and your point????
>>
>> That I too had one.
>
> If I ever saw one with a moat, it was a very long time ago. The image
> sw provided above is not the type in question and everyone knows those
> plain ones can be easily found without resorting to a restaurant
> supply store.
>
> If Travis can't find what he wants anywhere else, a good place to
> inquire would be Tap Plastics because they can fabricate to order.

I looked on Amazon. They do have them but the moat might not be deep enough
for him.

[Julie Bove[_2_]]

"Robert" > wrote in message
...
> "Travis McGee" wrote in message ...
>>Thanks. That's what I may have to do, if it's not too pricey.
>
> Is $19.95 for a set of 3 too pricey?
> http://www.chefscatalog.com/product/...-set-3-pc.aspx
>
>
>
> Robert

Those look nice! I don't think I've seen this website before. Thanks!

[sf[_9_]]

On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
> wrote:

> I looked on Amazon. They do have them but the moat might not be deep enough
> for him.

He said in the OP that he'd seen boards with tiny moats already and
they weren't what he was looking for.


--

Good Food.
Good Friends.
Good Memories.

[Julie Bove[_2_]]

"sf" > wrote in message
...
> On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
> > wrote:
>
>> I looked on Amazon. They do have them but the moat might not be deep
>> enough
>> for him.
>
> He said in the OP that he'd seen boards with tiny moats already and
> they weren't what he was looking for.

Yes. I can't say that these moats were tiny. But I also can't say that
they were not. Since I did not see his former board and do not know what he
considers to be an appropriate moat.

[sf[_9_]]

On Wed, 28 May 2014 16:43:46 -0700, "Julie Bove"
> wrote:

>
> "sf" > wrote in message
> ...
> > On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
> > > wrote:
> >
> >> I looked on Amazon. They do have them but the moat might not be deep
> >> enough
> >> for him.
> >
> > He said in the OP that he'd seen boards with tiny moats already and
> > they weren't what he was looking for.
>
> Yes. I can't say that these moats were tiny. But I also can't say that
> they were not. Since I did not see his former board and do not know what he
> considers to be an appropriate moat.

He's talking about a poly cutting board with a moat the same size as
hardwood and bamboo cutting boards. I've seen them, but it was
probably way back when he bought the one he wants to replace.
http://www.homedepot.com/catalog/pro...c040eb_300.jpg


--

Good Food.
Good Friends.
Good Memories.

[Travis McGee[_2_]]

On 5/28/2014 8:01 PM, sf wrote:
> On Wed, 28 May 2014 16:43:46 -0700, "Julie Bove"
> > wrote:
>
>>
>> "sf" > wrote in message
>> ...
>>> On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
>>> > wrote:
>>>
>>>> I looked on Amazon. They do have them but the moat might not be deep
>>>> enough
>>>> for him.
>>>
>>> He said in the OP that he'd seen boards with tiny moats already and
>>> they weren't what he was looking for.
>>
>> Yes. I can't say that these moats were tiny. But I also can't say that
>> they were not. Since I did not see his former board and do not know what he
>> considers to be an appropriate moat.
>
> He's talking about a poly cutting board with a moat the same size as
> hardwood and bamboo cutting boards. I've seen them, but it was
> probably way back when he bought the one he wants to replace.
> http://www.homedepot.com/catalog/pro...c040eb_300.jpg
>
>

Yes, exactly, except that the one I had also had a "well" in one corner,
a circular depression that the moat fed into, to keep the moat from
overflowing, and to collect the juices if I wanted to use them for gravy.

I already have one of these:
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
.. It does exactly what I want, but it is rather unwieldy.

[sf[_9_]]

On Wed, 28 May 2014 20:27:22 -0400, Travis McGee
> wrote:

> On 5/28/2014 8:01 PM, sf wrote:
> > On Wed, 28 May 2014 16:43:46 -0700, "Julie Bove"
> > > wrote:
> >
> >>
> >> "sf" > wrote in message
> >> ...
> >>> On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
> >>> > wrote:
> >>>
> >>>> I looked on Amazon. They do have them but the moat might not be deep
> >>>> enough
> >>>> for him.
> >>>
> >>> He said in the OP that he'd seen boards with tiny moats already and
> >>> they weren't what he was looking for.
> >>
> >> Yes. I can't say that these moats were tiny. But I also can't say that
> >> they were not. Since I did not see his former board and do not know what he
> >> considers to be an appropriate moat.
> >
> > He's talking about a poly cutting board with a moat the same size as
> > hardwood and bamboo cutting boards. I've seen them, but it was
> > probably way back when he bought the one he wants to replace.
> > http://www.homedepot.com/catalog/pro...c040eb_300.jpg
> >
> >
>
> Yes, exactly, except that the one I had also had a "well" in one corner,
> a circular depression that the moat fed into, to keep the moat from
> overflowing, and to collect the juices if I wanted to use them for gravy.
>
> I already have one of these:
> http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
> . It does exactly what I want, but it is rather unwieldy.

I think Tap Plastics or whatever plastic fabricator you have in your
area is what you need. Take your board to them and tell them that's
what you want (in whatever size).


--

Good Food.
Good Friends.
Good Memories.

[Julie Bove[_2_]]

"sf" > wrote in message
...
> On Wed, 28 May 2014 16:43:46 -0700, "Julie Bove"
> > wrote:
>
>>
>> "sf" > wrote in message
>> ...
>> > On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
>> > > wrote:
>> >
>> >> I looked on Amazon. They do have them but the moat might not be deep
>> >> enough
>> >> for him.
>> >
>> > He said in the OP that he'd seen boards with tiny moats already and
>> > they weren't what he was looking for.
>>
>> Yes. I can't say that these moats were tiny. But I also can't say that
>> they were not. Since I did not see his former board and do not know what
>> he
>> considers to be an appropriate moat.
>
> He's talking about a poly cutting board with a moat the same size as
> hardwood and bamboo cutting boards. I've seen them, but it was
> probably way back when he bought the one he wants to replace.
> http://www.homedepot.com/catalog/pro...c040eb_300.jpg
>
The ones I saw may have been like that. Not sure.

[sf[_9_]]

On Wed, 28 May 2014 22:00:28 -0700, "Julie Bove"
> wrote:

>
> "sf" > wrote in message
> ...
> > On Wed, 28 May 2014 16:43:46 -0700, "Julie Bove"
> > > wrote:
> >
> >>
> >> "sf" > wrote in message
> >> ...
> >> > On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
> >> > > wrote:
> >> >
> >> >> I looked on Amazon. They do have them but the moat might not be deep
> >> >> enough
> >> >> for him.
> >> >
> >> > He said in the OP that he'd seen boards with tiny moats already and
> >> > they weren't what he was looking for.
> >>
> >> Yes. I can't say that these moats were tiny. But I also can't say that
> >> they were not. Since I did not see his former board and do not know what
> >> he
> >> considers to be an appropriate moat.
> >
> > He's talking about a poly cutting board with a moat the same size as
> > hardwood and bamboo cutting boards. I've seen them, but it was
> > probably way back when he bought the one he wants to replace.
> > http://www.homedepot.com/catalog/pro...c040eb_300.jpg
> >
> The ones I saw may have been like that. Not sure.

Trust me, they weren't - they had moats that were maybe 1/4 inch wide
at best. If you saw anything that was anywhere near his requirements,
you would have posted the link.


--

Good Food.
Good Friends.
Good Memories.

[Julie Bove[_2_]]

"sf" > wrote in message
...
> On Wed, 28 May 2014 22:00:28 -0700, "Julie Bove"
> > wrote:
>
>>
>> "sf" > wrote in message
>> ...
>> > On Wed, 28 May 2014 16:43:46 -0700, "Julie Bove"
>> > > wrote:
>> >
>> >>
>> >> "sf" > wrote in message
>> >> ...
>> >> > On Tue, 27 May 2014 23:22:09 -0700, "Julie Bove"
>> >> > > wrote:
>> >> >
>> >> >> I looked on Amazon. They do have them but the moat might not be
>> >> >> deep
>> >> >> enough
>> >> >> for him.
>> >> >
>> >> > He said in the OP that he'd seen boards with tiny moats already and
>> >> > they weren't what he was looking for.
>> >>
>> >> Yes. I can't say that these moats were tiny. But I also can't say
>> >> that
>> >> they were not. Since I did not see his former board and do not know
>> >> what
>> >> he
>> >> considers to be an appropriate moat.
>> >
>> > He's talking about a poly cutting board with a moat the same size as
>> > hardwood and bamboo cutting boards. I've seen them, but it was
>> > probably way back when he bought the one he wants to replace.
>> > http://www.homedepot.com/catalog/pro...c040eb_300.jpg
>> >
>> The ones I saw may have been like that. Not sure.
>
> Trust me, they weren't - they had moats that were maybe 1/4 inch wide
> at best. If you saw anything that was anywhere near his requirements,
> you would have posted the link.

Well, I thought I saw more than one. Now in looking I only see this one.
Here's the link:

http://www.amazon.com/Prepworks-Prog...with+reservoir