pasta machine problem
 

Hi all

My pasta machine seems to be grating itself (metal on metal)
where the barrels meet the frame and it
is leaving nasty black stuff on the edge of the sheet

It says I cant wet it on the instructions?
Its a "ethos" machine, cost 30euro (about 30bucks)

Any thoughts? Cheapo machine?

Cheers

Niall


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.622 / Virus Database: 400 - Release Date: 13/03/2004

pasta machine problem
 

"Niall Smyth" > wrote in
message ...
: Hi all
:
: My pasta machine seems to be grating itself (metal on metal)
: where the barrels meet the frame and it
: is leaving nasty black stuff on the edge of the sheet
:
: It says I cant wet it on the instructions?
: Its a "ethos" machine, cost 30euro (about 30bucks)
:
: Any thoughts? Cheapo machine?
:
: Cheers
:
: Niall
===========

Have you tried putting a drop or two of oil at the spot where the
metal is rubbing? I would suggest either olive oil or mineral
oil. After you do that, try running a scrap piece of pasta dough
through it a couple of times to absorb the remnants of the metal
filings and black yuckies. Then be sure to throw that piece of
dough away. LOL That should take care of your problem. If not,
you may need to contact the manufacturer.
--
Cyndi
<Remove a "b" to reply>

pasta machine problem
 

"Niall Smyth" > wrote in
message ...
: Hi all
:
: My pasta machine seems to be grating itself (metal on metal)
: where the barrels meet the frame and it
: is leaving nasty black stuff on the edge of the sheet
:
: It says I cant wet it on the instructions?
: Its a "ethos" machine, cost 30euro (about 30bucks)
:
: Any thoughts? Cheapo machine?
:
: Cheers
:
: Niall
===========

Have you tried putting a drop or two of oil at the spot where the
metal is rubbing? I would suggest either olive oil or mineral
oil. After you do that, try running a scrap piece of pasta dough
through it a couple of times to absorb the remnants of the metal
filings and black yuckies. Then be sure to throw that piece of
dough away. LOL That should take care of your problem. If not,
you may need to contact the manufacturer.
--
Cyndi
<Remove a "b" to reply>