One would think that pot roast would be the easiest meal to cook. I am
considered a good cook, but, for some reason, I can't seem to cook a good
pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2 pound
roast. I'm not sure what cut of meat to use. I've tried rump and sirloin
tip but they were too tough. I finally made a decent one last week using a
cut of meat with the word "round" in it, but threw away the label before I
made a note of it. I've looked at the chuck roast, but they are all loaded
with fat. What cut do you guys use? Thanks.

Snickers wrote:
> One would think that pot roast would be the easiest meal to cook. I am
> considered a good cook, but, for some reason, I can't seem to cook a good
> pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2 pound
> roast. I'm not sure what cut of meat to use. I've tried rump and sirloin
> tip but they were too tough. I finally made a decent one last week using a
> cut of meat with the word "round" in it, but threw away the label before I
> made a note of it. I've looked at the chuck roast, but they are all loaded
> with fat. What cut do you guys use? Thanks.
>
>
Maybe rump & sirloin are too lean & dry out. In OZ I use 'rolled
roast',- sure it has some fat but that usually means tenderness &
flavour.Maybe you could remove the roast & 'de-fat' the broth with paper
towels or chill it for a while & lift of the crap.

Snickers wrote:
> One would think that pot roast would be the easiest meal to cook. I am
> considered a good cook, but, for some reason, I can't seem to cook a good
> pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2 pound
> roast. I'm not sure what cut of meat to use. I've tried rump and sirloin
> tip but they were too tough. I finally made a decent one last week using a
> cut of meat with the word "round" in it, but threw away the label before I
> made a note of it. I've looked at the chuck roast, but they are all loaded
> with fat. What cut do you guys use? Thanks.
>
>
How much liquid are your using?
How long and at what temperature are you cooking it?

Regards
Lee in Toronto

I use about a cup of beef broth and cook it on low in the crock pot for
about 4 to 5 hours. I put onions, carrots, and potatoes on top of the roast
so that the roast will cook in the broth.

"Lee" > wrote in message
...
> Snickers wrote:
>> One would think that pot roast would be the easiest meal to cook. I am
>> considered a good cook, but, for some reason, I can't seem to cook a good
>> pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2 pound
>> roast. I'm not sure what cut of meat to use. I've tried rump and
>> sirloin tip but they were too tough. I finally made a decent one last
>> week using a cut of meat with the word "round" in it, but threw away the
>> label before I made a note of it. I've looked at the chuck roast, but
>> they are all loaded with fat. What cut do you guys use? Thanks.
> How much liquid are your using?
> How long and at what temperature are you cooking it?
>
> Regards
> Lee in Toronto

Snickers wrote:
> I use about a cup of beef broth and cook it on low in the crock pot for
> about 4 to 5 hours. I put onions, carrots, and potatoes on top of the roast
> so that the roast will cook in the broth.
>
> "Lee" > wrote in message
> ...
>> Snickers wrote:
>>> One would think that pot roast would be the easiest meal to cook. I am
>>> considered a good cook, but, for some reason, I can't seem to cook a good
>>> pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2 pound
>>> roast. I'm not sure what cut of meat to use. I've tried rump and
>>> sirloin tip but they were too tough. I finally made a decent one last
>>> week using a cut of meat with the word "round" in it, but threw away the
>>> label before I made a note of it. I've looked at the chuck roast, but
>>> they are all loaded with fat. What cut do you guys use? Thanks.
>> How much liquid are your using?
>> How long and at what temperature are you cooking it?
>>
>> Regards
>> Lee in Toronto
>
>
You are UNDER cooking it. Crock pot cooking for meat should be 8 hours
on low heat. High heat will turn it to mush.

Also, when cooking vegetables with the meat, the veggies go on the
bottom and the meat on top of it.

Regards
Lee in Toronto

Do I feel dumb, Lee! I always assumed that it was tough because I
*over*cooked it. I was told that since my roast was so small, that I didn't
need to cook it very long. I guess undercooking can make it tough as well.
I also thought the veggies went on top so the meat could simmer in the
broth. I wondered why my veggies were a little crunchy. XXXlager gave me
advice on the cut of meat. Since I always used the rump or sirloin tip,
that may be why mine had no flavor. And Janet gave me a great idea for
seasonings and cuts of meat. I'm having company tomorrow night, so maybe
I'll try again. Thanks guys for all of your advice.

When my company leaves, my next topic will be questions about grilling
simple things (hamburgers, ribs, etc.) on a charcoal grill. I hate my gas
grill and always loved the taste of something cooked over charcoal. I
haven't used charcoal in many many years and want to start back. More
later...Thanks, everyone.

"Lee" > wrote in message
...
> Snickers wrote:
>> I use about a cup of beef broth and cook it on low in the crock pot for
>> about 4 to 5 hours. I put onions, carrots, and potatoes on top of the
>> roast so that the roast will cook in the broth.
>>
>> "Lee" > wrote in message
>> ...
>>> Snickers wrote:
>>>> One would think that pot roast would be the easiest meal to cook. I am
>>>> considered a good cook, but, for some reason, I can't seem to cook a
>>>> good pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2
>>>> pound roast. I'm not sure what cut of meat to use. I've tried rump
>>>> and sirloin tip but they were too tough. I finally made a decent one
>>>> last week using a cut of meat with the word "round" in it, but threw
>>>> away the label before I made a note of it. I've looked at the chuck
>>>> roast, but they are all loaded with fat. What cut do you guys use?
>>>> Thanks.
>>> How much liquid are your using?
>>> How long and at what temperature are you cooking it?
>>>
>>> Regards
>>> Lee in Toronto
>>
>>
> You are UNDER cooking it. Crock pot cooking for meat should be 8 hours on
> low heat. High heat will turn it to mush.
>
> Also, when cooking vegetables with the meat, the veggies go on the bottom
> and the meat on top of it.
>
> Regards
> Lee in Toronto

Snickers wrote:
> Do I feel dumb, Lee! I always assumed that it was tough because I
> *over*cooked it. I was told that since my roast was so small, that I didn't
> need to cook it very long. I guess undercooking can make it tough as well.
> I also thought the veggies went on top so the meat could simmer in the
> broth. I wondered why my veggies were a little crunchy. XXXlager gave me
> advice on the cut of meat. Since I always used the rump or sirloin tip,
> that may be why mine had no flavor. And Janet gave me a great idea for
> seasonings and cuts of meat. I'm having company tomorrow night, so maybe
> I'll try again. Thanks guys for all of your advice.
>
>

For a pot roast, use the cheapest cut of meat you can find! Trim the
fat, and if it has a marrow bone, this will enhance the flavour.

If you want to have incredible flavour, roast marrow bones under high
heat in the oven until the marrow bubbles and turns medium brown. Turn
over and do the other side. Throw this into a pot roast, stew, or soup
and get prepared to sign autographs! <vbg>

Size of roast doesn't matter for a crock pot but does for oven roasting.
Nothing will make a really good roast (beef, veal, pork, chicken,
lamb) if it is under three pounds.

If you must cook a small roast, brown it in a skillet before you put it
in the oven.

I don't know where you live, but if you have salt beef available (in a
brine in a big plastic bucket - requires no refrigeration), it will be
incredible in a crock pot. Rinse off and soak in cold water for three
or four hours. Put in crock pot with potatoes, carrots, yellow turnip,
small onions, some fresh ground pepper and a bay leaf. Serve in a soup
plate with lots of broth. I sometimes add cobs of corn cut in two inch
pieces along with sweet potatoes.

Regards
Lee

Snickers wrote:
> One would think that pot roast would be the easiest meal to cook. I am
> considered a good cook, but, for some reason, I can't seem to cook a good
> pot roast. I cook the roast in the crock pot and use a 2 to 2 1/2 pound
> roast. I'm not sure what cut of meat to use. I've tried rump and sirloin
> tip but they were too tough. I finally made a decent one last week using a
> cut of meat with the word "round" in it, but threw away the label before I
> made a note of it. I've looked at the chuck roast, but they are all loaded
> with fat. What cut do you guys use? Thanks.
>
>
Try the flat cut or first cut brisket. It makes a nice pot roast and is
much leaner than a chuck roast. I find rump and sirloin rather dry, too.

I use some onion soup mix, water, ketchup, a little red wine and a
tablespoon of cider vinegar in the braising liquid. For seasonings, I
use garlic, bay leaves, thyme and marjoram as well as the onion soup.
Makes a great tasting pot roast.

--
Janet Wilder
Bad spelling. Bad punctuation
Good Friends. Good Life