![]() |
SO2 Goof
I mistakenly added 200 ppm of SO2 instead of the intended 50 ppm to 40 gallons
of just-crushed Merlot this afternoon. Any thoughts on how to recover from the error. I am holding off on adding yeast starter until I have a plan of action. Any help would be appreciated. Dennis |
SO2 Goof
"D. J. Gooding" > wrote:
> I mistakenly added 200 ppm of SO2 instead of the intended 50 ppm to 40 gallons > of just-crushed Merlot this afternoon. Any thoughts on how to recover from the > error. I am holding off on adding yeast starter until I have a plan of action. > Any help would be appreciated. Dennis Aerate it by pouring and forth between buckets (may be a bit difficult with 40 gallons), or stir it vigourously (use an oar, or length of pvc pipe, or 2x4 covered with plastic wrap). Don't pitch the yeast for at least 24 hours. |
SO2 Goof
> I mistakenly added 200 ppm of SO2 instead of the intended 50 ppm to 40
> gallons of just-crushed Merlot this afternoon. Any thoughts on how to > recover from the error. I am holding off on adding yeast starter until I > have a plan of action. Any help would be appreciated. Dennis Try aeration or hydrogen peroxide. See http://members.tripod.com/~BRotter/SO2.htm and scroll down to "Removing Free SO2". Ben |
SO2 Goof
Thanks for the help. I aerated the crush by pouring it back and forth between
fermenters several times over a 24 hour period and then innoculating it with yeast. I am pleased to say that it is bubbling merrily this morning. Dennis In article >, says... > >I mistakenly added 200 ppm of SO2 instead of the intended 50 ppm to 40 gallons >of just-crushed Merlot this afternoon. Any thoughts on how to recover from the >error. I am holding off on adding yeast starter until I have a plan of action. > Any help would be appreciated. Dennis > |
All times are GMT +1. The time now is 05:04 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
FoodBanter